30 Years Of Quality, Customer Satisfaction & Speedy Service
Call Our Dedicated Help Desk On Local Rate 0844 8586 670
Help Desk Local Rate 0844 8586 670
If you have ever thought of sprucing up your bathroom, kitchen, utility room or even conservatory, then Speedy Plastics and Resins has the product for you. We are the largest distributor of GEO-panel wall and ceiling panels in the UK. We stock large quantities of the complete range in both 5mm and 10mm and in all the colours and finishes, plus all of the associated trims.
There are many great reasons to use this Geo-panel wall and ceiling panels:
• 100% waterproof PVC core
• Light and easy to fit
• Suitable for both wet and dry areas
• Non-porous, hygienic, mould free
• Virtually maintenance free with a wipe clean surface
• No tiling or grouting to discolour or leak
Here is a brief guide showing how easy it is to fit GEO-panel
The panels can be fixed directly to the wall if the surface is relatively even, and if the wall is dry, using panel adhesive, or fix on to a frame of wooden batons. When fitting GEO-panel PVC panels to the ceiling, always fix to a frame of wooden batons. When fixing the panels to wooden batons, they can be fixed through the extending backplate fixing tongue using staples with a staple gun, by hammer with panel pins/nails, with screws, or with panel adhesive. When fixing to the ceiling, adhesive should not be used, unless as an additional fixing combined with staples, panel pins/nails, or screws.
To make a wooden frame, strap the wall with wooden batons placed approximately every 30 – 40cm according to the direction of assembly. If the panels are assembled vertically, strap in the opposite direction horizontally, and vice-versa. If panels are assembled diagonally, the baton can be installed vertically, horizontally or at right angles to the panels.
Start off with the preferred end moulding i.e end cap U, internal, external, or scotia moulding. Glue the panel or panel-pin (nail), staple or screw the first panel through the backplate fixing tongue opposite the starting side. Insert the tongue of the next panel into the groove and continue the installation of the remaining panels in the same manner. Use appropriate PVC trims to finish all corners and ends.
For further information on our wall and ceiling panels, please do not hesitate to contact Speedy Plastics and Resins on local number (0844) 8586670 and our team will be delighted to help you.